ACCESSORIES

Pressure gauges KFM, RFM

Pressure gauges with capsule elements and Bourdon tubes for pressure display, resistant to positive pressure, with zero point correction, for gas and air.Measuring ranges:

KFM: 0 to 400 mbar,

RFM: 0 to 16 bar,

diameter: 63 or 100 mm.

Adjusting cocks GEHV, GEH, LEH

Adjusting cocks for precise adjustment of flow rates.GEHV: for gas pe max. 1 bar, for air pe max. 4 bar, operated by hand wheel with adjusting scale, DIN-DVGW tested and registered.

GEH: for gas, pe max. 1 bar, tool-operated.

LEH: for air, pe max. 4 bar, operated by hand wheel.

DN: 8 to 50, connection: internal thread on both ends or internal/external thread.

Stainless steel bellows units EKO

Stainless steel bellows units for stress-free pipe installation and for avoiding transmission of vibrations, for gas, air and water, with restricting orifice if required, DIN-DVGW tested and registered.DN: 15 to 200,connection: internal thread, external thread or flange,pe: max. 4 or 10 bar.

Stainless steel flexible tubes ES

Stainless steel flexible tubes for stress-free, flexible connection of devices and pipes and to avoid transmission of vibrations, for gas, air and water, DIN-DVGW tested and registered.DN: 8 to 100,connection: external thread,pe: max. 4 or 16 bar,

length: 500 to 2000 mm

Non-return gas valves GRS, GRSF

Non-return gas valve to prevent gas creepage or surge, for gas, air and oxygen, DIN-DVGW tested and registered.GRS: not flame-arrestingGRSF: with sinter bronze flame arrester, so flame-arresting in the case of use with combustion airDN: 15 to 80

Connection: thread or flange,

Pe: max. 100 mbar or 5 bar.

Flow meters DM, DE

Turbine wheel meters for measuring gas flow on gas consumption equipment, for gas burner adjustment, for gas and air.DM: mechanical counter headDE: electronic counter headMeasuring range: 1.6 to 1600 m3/h,

DN: 25 to 150, connection: thread or installation between two flanges,

Pe: max. 4 bar, 16 bar

M bus interface for DE available.